background image

Copyright Innovative Technology Ltd 2008                                                                                                                  GA620-1 

 
3 GENERAL DESCRIPTION

 

 

The NV200 is the next generation of note reader from  

Innovative Technology Ltd. 

· Simple, quick re-programming (approximately 30 

seconds) with 128 bit encrypted memory card, PIN 

number protected 

· Up to 16 channels (Depending on mode of operation) 

· Secure dual lock cash box with 500 used note capacity 

· Seamless note path 

· Can accept notes up to 85mm wide and 167mm long 

· Seconds note to note 

· Reads industry standard barcodes in any direction 

· Note centring and straightening mechanism 

· Single note escrow function 

· User definable colour for bezel illumination

 

 

Figure 1 

- The NV200 validator

 

Table 4

 – General Specification 

 

ACCESSING 

 

In the Appendix B – NV200 Mechanical Installation you can find a detailed explanation for 

cash box removal, note path access, bezel installation and validator head unit removal. 

 

 

 

 

Note sizes accepted 

Width: 60 – 85mm, Length: 115 – 170mm 

Weight 

2.8kg 

Note to note time 

3 seconds 

Escrow 

Single note 

Cash box capacity 

500 street grade notes 

Interface 

SSP, Parallel, Pulse, Binary, ccTalk, MDB. 
(Contact ITL for other interface availability) 

 Cash box 

  

Note path access 

 

Head unit removal 

 

 

 

 

 

 

 

 

 

Bezel installation  

NV200 Operations Manual                                                                                            6 

Содержание NV200

































Отзывы: