PAGE 3 OF 3
www.LCDarms.com 800.524.2744
How do I counterbalance my arm?
1
7/32" Allen Wrench
IMPORTANT!
• Monitor must be on arm
• Arm must be in mount
Press the arm down to
approximately parallel
with the
desk prior to turning the strength
adjustment screw.
Depending on the weight of your
monitor,
you may have to make
15-20 turns.
HOW TO COUNTERBALANCE
www.LCDarms.com/video.php
2
In some instances,
further
counterbalance adjustments
are needed to allow the arm’s
instant height adjustment function
to work properly.
If your arm is not staying in
position after performing step 1,
follow these steps:
With arm in raised position,
tighten set screw
(A).
With arm in horizontal position,
tighten set screw
(B).
Do not over tighten screws.
3/32" Allen Wrench
If the arm
drifts downward,
turn the adjustment screw counter-
clockwise.
If the
arm
drifts upward,
turn the adjustment screw clockwise.
A
B
