Innovative Technology Smart Coin System, Руководство пользователя

Страница: 18 / 29

Smart Coin System User Manual Page 17 of 28
Copyright © Innovative Technology Ltd 2015
GA02033
A summary of the Status Indicator Flash Codes for the payout module are shown
here:
Led Colour Status Description Action
Green Flashing
1Hz Enabled and ready to
dispense
Red 1 Flash Hopper disabled Host system to send
enables command.
Red 2 Flashes Calibration Fault Optical sensor
contaminated. Operator
to clean exit sensor light
pipe. If fault persists,
return to ITL for service.
Red 3 Flashes No Encryption key set Host system to negotiate
key.
Red 4 Flashes Coin jammed Remove power,
manually empty coins
from bowl and check
hopper base for stuck
coins. Try manually
turning the disc.
Persistent jam may
require returning to ITL
for service.
Red 5 Flashes Fraud Attempt detected. Reset hopper. If this
persists it indicates a
problem with the top
pay-out flap, light guide
or exit sensor.
Red 6 Flashes Legacy, no longer used.
(Hopper empty)
Red 7 Flashes Memory checksum error Re-download hopper
firmware. If this persists
return to ITL for service.
Red 8 Flashes Hopper sensors not
initialised
Return to ITL for
service.
Red 9 Flashes Legacy, no longer used.
(Lid removed).