BLUETOOTH OPERATION
1. To operate Bluetooth mode, first turn on the unit.
2. Press the MODE BUTTON to select Bluetooth mode, or press the BLUETOOTH
BUTTON, “bt” will appear on the LED DISPLAY and flash. Press the BLUETOOH
BUTTON once, it will go into auto pairing mode and will search for the last paired
device. Press and hold BLUETOOTH BUTTON, it will go into pairing mode to search
for a new device.
3. Turn on the Bluetooth function of the device you want to link to and enable the search
or scan function to find the unit. Select "
ITSBO-520
" from the device list on your
external device.
If you are pairing your computer to the speaker using Bluetooth, you may need to set
the ITSBO-520 as your computer’s default sound device.
4. After successfully pairing the unit with your Bluetooth device, you will hear a tone that
indicates the device is connected.
If you want to pair the unit with a different Bluetooth device, disconnect the connection
via the currently paired device. Then follow the above steps to connect a new device.
• To begin playback, press
the
Play/Pause on your Bluetooth device or
the
PLAY/PAUSE
BUTTON on
the
unit. Press the button again to pause.
• Press the
BUTTON or
BUTTON to select the Next or Previous track.
• Slowly adjust both the volume control on the unit and/or your Bluetooth device
until you reach a comfortable listening level.
Notes:
•
Refer to the manual of your Bluetooth enabled device for Bluetooth operation since it
may vary from model to model.
•
If your Bluetooth enabled device does not support A2DP profile, it will not play the
music through the speaker, even if paired.
•
Remember to turn off the unit when you have finished listening.
•
Don't forget to switch off the power of your Bluetooth device as well.
•
The repeat function does not apply to the Bluetooth operation.
USB PLAYER OPERATION
The unit is compatible with, and will play MP3 files that are stored on a USB flash drive.
1. Press the
POWER SWITCH
to turn the unit ON.
2. Plug a USB flash drive into the USB port. The unit will automatically switch modes and
begin reading the flash drive.
3. Press the
PLAY/PAUSE
to pause the USB, and press again to resume.
4.
Press the
BUTTON or
BUTTON the player will go to next or previous track.
5.
Press and hold the
BUTTON or
BUTTON, the player will play fast forward or
rewind.
6.
Tap the REPEAT BUTTON repeatedly during playback to select repeat ONE or
repeat ALL. Repeat ONE/Repeat ALL will be indicated on the LED Display.
