IMPORTANT INFORMATION
5
FCC Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
California Prop 65 Warning
"WARNING" This product contains chemicals known to the State of California to cause birth defects or other
reproductive harm. For more information on these regulations and a list of chemicals, log on the following website
address: http://www.oehha.ca.gov/prop65.html
PLAYING AUDIO
Bluetooth Connection
1. Turn the power button to “ON”. The LED light will illuminate blue, blink quickly and beep twice.
2. Activate Bluetooth on your smartphone or other Bluetooth enabled device and search for speaker name
“
ITSB-356
” then connect it. The blue LED light will blink slowly and beep three times once connected successfully.
3. Play music from your device.
4. Press Next (ı») or Previous (ı«) button on the speaker or on your device to select song.
5. Press
PLAY/PAUSE (>ıı) button on the speaker or on your device to Play/Stop music.
6. Use the “Volume Dial“ to adjust volume up and down. Or adjust volume using your devices’ volume.
*Note - Not all functions/buttons will work with all devices.
Playing Music from TF/Micro SD Card
1. Turn the Power button to “ON”.
2. Insert TF Card into slot, the music stored will play automatically and the blue LED light will remain illuminated.
3. While music is playing, to select the next or previous song requires a short press of the Next (ı») or
Previous (ı«) buttons. To Fast Forward or Rewind current song selection, press and hold the Next (ı») or
Previous (ı«) button.
4. Press PLAY/PAUSE (>ıı) to play or pause.
5. Turn the Power button to “OFF” while without use.
Note: In Bluetooth or FM mode, if a TF Card is inserted, it will automatically start playing it. To return to
the previous mode, use the MODE button.
FM Radio
1. In FM radio mode, the audio cable provided can be used as an antenna. Please Insert the audio cable to get the
best FM signal before use.
2. Turn the power button to “ON”, press the “MODE” button to switch to FM radio mode.
3. While FM Radio is playing, a short press of the PLAY/PAUSE (>ıı) button will auto search through the
FM Channels and store them automatically.
4. Press Next (ı») or Previous (ı«) buttons to change the stored FM channels.
Aux-In
For other compatible music devices and MP3/MP4 players, use the supplied 3.5mm Aux-In cable to connect from
the device’s “Line Out” to the “Aux-In” of this speaker. Then press the “MODE” button to switch to Aux-In state.
NOTE:
When using an external device, all functions will be controlled by only the external device except the
PLAY/PAUSE (>ıı) button.
