17
NOTE :
REMOVING OF USB
Before removing USB memory devices, turn off the power to the unit, or switch the function mode to
either CD, Radio or Aux first.
NOTE :
If the system is connected to an MP3 player via the USB socket, due to variances in MP3
encoding format, some MP3 files may not be able to play (or be copied) via the USB socket. This is
not a malfunction of the system. Further more, the system does not support iPOD.
ENCODING OF CD/PHONO/AUX IN/TAPE TO USB
The system is able to encode normal CD, Aux input, or from turntable to MP3 format and record to
memory media such as Flash memory sticks via the USB connection port. Before beginning, make
sure to insert a memory media device with ample file space into the USB port.
A .CD ENCODING
1. Perform normal playback of the CD track you want to encode and record.
2. Long press REC/COPY button and then press FOLDER-UP or FOLDER-DN button to select “RIP
ONE” or “RIP ALL”.
3. Press REC/COPY button again to confirm setting.
4. Press the STOP ( ) button two times to cancel the recording.
B.ENCODING BITRATE- You may select the desired bitrate for the encode quality. Select from 96KB,
128KB, and 256KB by pressing the REC/QUALITY button.
C. Copying of CD-MP3 disc- When inserting an MP3 disc, instead of a CD disc, the system will copy
the files to the USB memory device.
The operation procedure is the same as with CD encoding as mentioned on above. First, long press
the REC/COPY button and then press FOLDER-UP or FOLDER-DN button to select “COPY ONE”,
“COPY DIR” and “COPY ALL”.
