10
VERY IMPORTANT: PLEASE READ BEFORE LINKING.
All Games must have in its software
“
GAME ID
”
option set to a number other than 0. The game
with its
“
Game ID
”
option set to 1 will be player 1. The game with its
“
Game ID
”
option set to 2 will
be player 2. The
“
Game ID
”
option determines the player station the game becomes when linked.
The games will link by default when they are credited. If only one station is coined up and no other
player joins in, the game will start in solo mode and no other players can join in. Only 1 set of linked
games can be going at the same time, so any additional games will directly enter solo mode if any
other game is playing. A maximum of 4 games can be linked.
From the back of the game, connect the marquee link harness to the marquee. The other end of
the cable connects to the game shown below. Now connect each cabinet you wish to link using the
cabinet link cable that was included with the game. Only one cable is needed to link two cabinets.
Locate the AC power cord and attach this to the black box
’
s AC receptacle.
GAME ID
Set to 1
GAME ID
Set to 2
To Finish the setup, you must set the
“
GAME ID
”
values so that they match the above picture.
See the next few pages on how to program both the cabinets and the marquee.
