Innovative Concepts in Entertainment Super Kixx Pro, Руководство владельца и по обслуживанию

Страница: 5 / 34

5
INSTALLING THE BALL & ELEVATOR ASSEMBLY
Step2:
Located inside the base are two ramp assemblies, the elevator, and hardware. The components
are labeled by numbers and will match with where they are installed. Locate the elevator labeled
number one. Attach the elevator to the cabinet top.
The motor should be on the opposite of the
main harness hole . There will also be a number on both the elevator and cabinet which should
line up.
Use five AA6174 screws and five washers AA6841 to secure the assembly.
Step1:
A) Pace the top of the game so that
the dome goes inside the box.
This
will allow you to install the elevator with-
out scratching the dome.
B) INSTALL the GAME BALL NOW.
Drop it through the center hole.
(The
game ball is located in the parts pack)
WARNING: To avoid a ball jam, only
install one ball in game! Keep the
other ball as a replacement.
MOTOR
1
Decals aligned
** NOTE **
Pay attention to where the
harness hole is at all times
during assembly. This will
aid you in knowing which
side you are working on .
Wire harness
hole this side.
1
AA6841 WASHER 5 PLACES
AA6174 SCREW 5 PLACES