MAINTENANCE
ICE SURFACE
The ice surface should be cleaned as needed, using
Windex", Fantastic", or a comparable product. Apply
liberally to a lint–free cloth, wipe surface thoroughly, and
let dry. For a “faster” ice surface, dust lightly with Pledge"
and let dry.
DOME
The Lexan dome should be cleaned as needed, using a
furniture polish type of cleaner. Apply to a lint–free cloth
and wipe dome thoroughly.
NOTE: PLEDGE" IS RECOMMENDED. ALWAYS TEST
THE CLEANER YOU INTEND TO USE ALONG THE
FLANGE TO MAKE SURE THE CLEANER WILL NOT
HARM THE DOME FINISH. TO REMOVE SCRATCHES,
A SPECIAL SCRATCH REMOVER FORMULATED FOR
LEXAN SHOULD BE OBTAINED.
PLAYERS
Periodically inspect the players for appearance or possible
damage. Replace when necessary.
EJECTOR MECHANISM
Periodically test the mechanism by scoring goal and
observing puck ejection. If puck fails to eject, does not
clear ice surface, or ejects with excessive lean in one
direction, the mechanism is not working correctly. Open
the dome and remove the ice surface.
NOTE: BE CAREFUL NOT TO LOSE THE FLAT
WASHERS.
Start the game and observe operation. Check for foreign
particles under the ejector wire. The entire bracket
assembly can be bent to correct excessive lean in one
direction. Be sure all parts work freely. Check by pushing
the solenoid plunger only, to see that the ejector lifts up
about 3/8” from the cabinet bottom. If more or less
movement is noted, the ejector wire can be bent forward or
backward where it meets the plunger to obtain proper
operation.
Excessive random angle ejections can be straightened by
tightening the pivot screw. An ejector that sticks in the up
position can be fixed by loosening the pivot screw.
VIEW OF PLAYER AFTER INSTALLATION
EJECTOR WIRE
PIVOT SCREW
Содержание Super Chexx
Страница 5: ......
