Attach Brackets:
Determine the location of the equipment in the rack. Screw the (4)
brackets to the rack using the appropriate screws from the Rack Hardware Kit. The
four brackets are oriented with the two mounting holes facing up and the four
lightening holes facing out. Ensure the bolts attach the bracket tightly to the rack.
An installation is shown below.
Step 1
Mounting Holes
Lightening Holes
Bracket Hardware Kit
(13) 12-24 Phillips Head Screws
(13) 12-24 Cage Nut
6883 Kit
(2) Left 1U Conversion Brackets (13" Long)
(2) Right 1U Conversion Brackets (13" Long)
Rack Hardware Kit
(9) 10-32 Phillips Head Screws
(9) 12-24 Phillips Head Screws
(9) M6 Phillips Head Screws
4Post Installation Instructions
Step 2
Check for Bracket Pretension:
Make sure the brackets are attached correctly such
that the slight upward tilt is present. This allows for greater weight capacity.
Kit Contents
Page 2
