Copyright 2018, InnovaPrep LLC
Patented
https://www.innovaprep.com/patents
16
5
N
AVIGATING THE
M
ENU
This Section will guide you through the instrument's LCD menu instrument on the Control Panel. The three keys on the
right side of the Control Manual (symbols for
Up
(
▲ )
,
Down
(
▼
), and
Enter
(
⏎
), as shown in Figure 5.1) are used to
navigate the menu.
5.1
T
HE
M
AIN
M
ENU
When the instrument is first turned on, a Welcome screen will be displayed as soon as the unit boots up (about 5 seconds).
Press
Enter
(
⏎
)
to continue to the Main Menu screen.
The Main Menu consists of three selections:
Start Run,
Maintenance,
and
Instrument Settings.
5.2
T
HE
R
UN
P
ROTOCOL
M
ENU
Selecting
Start Run
from the Main Menu will display the Run Protocol screen. This screen displays:
Foam Volume Gauge
(E = empty / F = full)
Last Run
process time (mm:ss)
Name of the selected concentration run protocol (defaults to
FLAT
)
Start Run
Return
•
Selecting the named protocol (
FLAT)
will navigate to the
Protocol Setup
screen
where
another protocol can be
selected, created (see Section 8.5
Creating and Saving a Concentration Run Protocol),
or deleted. There are three
protocol options that have been preprogrammed by the factory named FLAT, HOLLOW, and ULTRA. These have
been named according to the three main types of CPTs available for use with the instrument:
FLAT
for use with
the flat CPTs (items CC08000 and CC08001),
HOLLOW
for use with the hollow fiber tips (items CC08018, CC08022,
CC08020), and
ULTRA
for use with the ultrafilter tips (item CC08003). See
Table
2.1 CPT Selection Guide for a full
description.
•
Selecting
Start Run
on the Run Protocols screen will immediately start the sampling process using the sample
protocol notated above.
•
Return
will lead back to the Main Menu.
Up (
▲
)
Enter (
⏎
)
Down (
▼
),
FIGURE 5.1 MAIN MENU DISPLAY
FIGURE 5.2 RUN PROTOCOL
DISPLAY
