Innovaphone IP1200, Руководство администратора

Страница: 49 / 114

innovaphone IP DECT Page 49
4.2 Administration
Everything that is necessary in active operation is carried out here.
This includes, for example, the registration of VoIP telephones with a gateway
or, if available, an innovaphone PBX.
The registration (subscription) of DECT handsets is also possible without a PBX
component directly at the IP1200. Each handset is identified via its unique IPEI
number. The effect of subscription to the telephone is that, as in LDAP, the sub-
scription is stored in the telephone. There are two ways to register a telephone:
1. Entry of the IPEI number in the relevant user object; subscription at the tele-
phone can then be performed (known subscription).
2. Subscription at the telephone is performed first (unknown subscription); the
call number of the desired free user object is then dialled. The IPEI number
is automatically entered in this user object.
4.2.1 Administration/DECT
DECT-related administrative settings of the IP1200 are made here.
4.2.1.1 Administration/DECT/Statistics
Detailed information about the DECT master and the DECT radios is displayed
Radio ID In Singlecell operation, the radio ID 0 must be specified.
In Multicell operation, every radio must have a unique ID.
The ID must lie in the range 0 - Sys-Mask (with Sys-Mask
specification)
or 0 - 254 (without Sys-Mask specification).
Sync
source The radio ID with which the radio is to synchronise.
Alt Sync
Source The radio ID with which the radio is to synchronise in the
event that the sync master is not accessible. Here, it is to be
noted that no loops must be created. In other words, if a
sync master exists with the radio ID 1 and an alt sync master
exists with the radio ID 3, then the alt sync master must on
no account synchronise with any radio, since the radio syn-
chronises with the alt sync master in the event of failure of
the sync master.