Innovaphone IP110 страница 18 Скачать руководство пользователя

Страница: 18 / 40

Operating Manual

IP Telephone IP110

- 16 -

Key

Effect

If you have at least 2 calls in the wait list, it is possible to use this
key sequence to display all

waiting

calls in the wait list one after

the other and to select at will which call you will pick up.

This does not change the

active

call (and if applicable the

waiting/held

call).

2.9.4 Dialling a new number

Whilst connected with an

active

call partner, you can set up a new connection by calling

another subscriber.

Key

Effect

in mode 2

Press the keys in sequence during an

active

call.

The call is put

on hold.

You will hear a dial tone.

Dial the desired

telephone number and a

further connection will be set up immediately.

Call transfer:

During an

active

call

press the key to transfer the

active

call to

another subscriber. Enter the number to whom you would like to
transfer the call in the box which is now open. Pressing the redial
key again will initiate the phone to ring or there will be a call waiting
indication at the selected destination.

In operating mode 1 the call

on hold

automatically becomes the

active

call after transfer.

It rings in operating mode 2. If you pick up the call manually then
you are connected to the first caller in the wait list.

2.9.5 Terminate

Press the clearing key to end the call with the

active

calling party on the display.

Mode 1

If the active call is terminated, you are subsequently automatically

connected with the call on hold

. The call on hold becomes the new

active

call

Mode 2

When you have ended the active call in this mode, the first call

waiting

the wait list will call you.

You can pick up the call manually. If you do not want to pick up the
call, then press the clear key to reject it.

Содержание IP110









































Результаты поиска

Содержание IP110

Отзывы:

Похожие инструкции для IP110

Бренды по названию

Популярные бренды

Innovaphone IP110, Руководство по эксплуатации

Результаты поиска

Содержание IP110

Отзывы:

Похожие инструкции для IP110

Бренды по названию

Популярные бренды