innovair MULTI-MAX VWM10H25F, Руководство пользователя

Страница: 15 / 40

MULTI-MAX HIGH WALLS OWNERS MANUAL
Introduction for buttons on remote controller
Function introduction for combination buttons
Child lock function
Press "▲" and "▼" simultaneously to turn on or turn off child lock function . When
child lock function is on, " " icon is displayed on remote controller. If you operate
the remote controller, the " " icon will blink three times without sending signal to
the unit.
Temperature display switchover function
Under OFF status, press " ▼" and "MODE" buttons simultaneously to switch
temp-erature display between
℃
and
℉
.
Press this button to turn off display light on indoor unit. " " icon on remote
controller disappears. Press this button again to turn on display light. " " icon is
displayed.
Under COOL, HEAT or DRY mode, press this button to start up sleep function.
" " icon is displayed on remote controller. Press this button again to cancel sleep
function and " " icon will disappear.
SLEEP button
LIGHT button
12
Press this button to start I FEEL function and " " will be displayed on the remote
controller. After this function is set, the remote controller will send the detected
ambient temperature to the controller and the unit will automatically adjust the
indoor temperature according to the detected tempera-ture. Press this button again
to close I FEEL func-tion and " " will disappear.
Please put the remote controller near user when this function is set. Do not put the
remote control-ler near the object of high temperature or low tem-perature in order
to avoid detecting inaccurate ambient temperature. When I FEEL function is turned
on, the remote controller should be put within the area where indoor unit can
receive the signal sent by the remote controller.
I-FEEL button
8℃ heating function
Under heat mode, press "TEMP" and "CLOCK" buttons simultaneously to start up or
turn off 8 ℃ heating function. When this function is started up, " " and "8 ℃ " will be shown
on remote controller, and the air conditioner keep the heating status at
8°C. Press "TEMP"
and "CLOCK" buttons simulta-neously again to exit 8℃ heating function.