HAPPY REHAB 2. INSTRUCTIONS FOR USE (EN) Rev. 1.0 Page 7
Assembly
Before using the HAPPY REHAB 2 system the table plate and
Upper support module (if applicable) must be mounted onto the
upper frame of HAPPY REHAB 2.
The table plate shall be mounted with the four screws as shown in Fig. 3 below.
Ensure the table plate is oriented with the countersunk of the holes upwards as
illustrated.
Fig. 3: Mounting the table plate.
The Upper support module shall be mounted (if applicable) as shown in Fig. 2.
The PC/ Laptop computer may be placed on top of the table.
