
the frequency. If you have SUNREX or JME wireless keyboard and setting
instruction. Make sure you have press the
“
setting button
”
and
“
link button
”
on
keyboard at the same time.
‧If you are working on the metal surface, try to use mouse pad.
‧Try to remove and link receiver and computer once again.
Troubleshooting for PC connection
‧
Make sure the receiver cable is plugged into the right port USB or PS/2.
Don’t remove or plug the cable when PC running.
‧
Make sure your USB or PS/2 port has the proper configuration. Refer to your
computer documentation for the correct port configuration.
‧
Try to remove and re-plug receiver cable into PC.
Cursor don’t move smoothly
‧Clean the ball and the ball cage if your mouse have this device.
‧For the wireless device, try to change the receiver position. It may be caused by the
long distance between receiver and trackball or mouse. Also may caused by PC
monitor( or big metal barrier) that will interference the receiver. It also may be
caused by low power battery. Check the battery according to steps mentioned
before. You also can reset the link between mouse/trackball and receiver. When
you do that, press the button on the receiver and then press
“
ID setting button
”
in
the keyboard.
Compatible with Windows 98/Me/2000/XP
Support Windows Me/2000/XP hot Key Function
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate