Hose
Flo
or
13
Make sure vacuum is turned off
and power cord is unplugged.
Never operate vacuum
screen and dust cup in proper
position.
no suction at end of hose, check to be
(Fig. 1).
• Empty debris. Hold over wastebasket
and press lever to release bottom lid
(Fig. 2).
any debris and shake off dust. (See
maintenance instructions on page 10.)
nozzle and squeeze tabs in to pull up
and remove (Fig. 3).
• Remove any debris or clogs (Fig. 4).
• Replace port cover and ensure it clicks
securely back into place
If still no suction, check for
• Remove hose from vacuum by pressing
clip on hose to release and pull away
check air path on vacuum where hose
connects to remove any debris. (Fig. 5)
• Use a rod or similar blunt implement to
clear any blockages in hose. Flex hose
to loosen debris (Fig. 6). Use caution if
there is any risk that glass or nails could
have become imbedded in hose.
and dust cup are returned to proper
position.
1
5
6
2
3
4
CAUTION
WARNING: