Innova 3130b, Руководство пользователя, Страница: 60 / 88

Live Data Mode
RECORDING (CAPTURING) LIVE DATA
58 OBD2
There are two ways that the Scan Tool can "record" Live Data:
„ Record by DTC Trigger
„ Record by Manual Trigger
If the POWER/LINK button is pressed at any time while in
Live Data mode, any stored (recorded) Live Data will be
cleared (erased) from the Scan Tool’s memory.
Record by DTC Trigger
This function automatically records (captures) Live Data information
when a DTC sets and saves it in the Scan Tool’s memory. The recorded
(captured) data can be a valuable troubleshooting aid, particularly if you
are experiencing a fault that is causing a DTC to set.
1. While linked to the vehicle, start the
engine, then press and release the
LD/M
button.
„ The “Mode Selection Menu” displays.
2. Use the UP and DOWN buttons,
as necessary, to highlight Live Data,
then press the
ENTER button.
„ The “Live Data” menu displays.
3. Use the UP and DOWN buttons,
as necessary, to highlight “Record Live
Data”, then press the
ENTER button.
„
The "Record Live Data Menu" dis-
plays.
4. Use the UP and DOWN buttons,
as necessary, to highlight “Record by DTC
trigger”, then press the
ENTER button.
„ If DTCs are presently stored in the
vehicle’s computer, an advisory
message displays. Use the
UP
and DOWN buttons, as
necessary, to highlight Erase DTCs,
then press the
ENTER button to
erase DTCs from the vehicle’s
computer. When the Erase process
is complete, the “Record by DTC
Trigger” screen displays.
5. When the "Record by DTC Trigger"
screen displays, select the desired
trigger point as follows: