InnoTeletek OPTIMUS SP5700 SERIES Скачать руководство пользователя

Страница: 2 / 62

Revised Version/ March 2007

User Manual

FCC Statement

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

Caution: Any changes or modifications to the equipment not expressly approved by the

party responsible for compliance could void user’s authority to operate the equipment.

FCC Compliance statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Содержание OPTIMUS SP5700 SERIES






























































Результаты поиска

Содержание OPTIMUS SP5700 SERIES

Отзывы:

Похожие инструкции для OPTIMUS SP5700 SERIES

Бренды по названию

Популярные бренды

InnoTeletek OPTIMUS SP5700 SERIES, Руководство пользователя

Результаты поиска

Содержание OPTIMUS SP5700 SERIES

Отзывы:

Похожие инструкции для OPTIMUS SP5700 SERIES

Бренды по названию

Популярные бренды