Page 4
320 Main Street Port Jefferson NY 11777 (631) 473-1500 FAX (631) 473-5259
41 Winter Street Boston MA 02108 (617) 695-2700 (617) 423-0466
4. Enter the correct code on the number pad. The
light will flash once for each key pressed.
5. Press the
[PROG]
button again to lock in the
code. The light should flash 3 times, and pro-
gramming is finished. For example, to program a
Sony TV:
First, find the Sony codes in the code list.
Then, try the first (latest model) code. Press:
[TV] [PROG] [0] [3] [8] [PROG]
When finished, try to operate the TV with the
remote. If the remote works with the TV, the
programming for the TV is finished. If the remote
does not work, try the next code: 141, and so-on,
until the correct code is found. If you cannot find
the correct code, refer to the Auto Search feature.
LEARNING CODES FROM EXISTING REMOTE CONTROLS
LEARNING CODES
1. Press the device button, which you wish to
store the learned code. (1 flash)
>79@
or
>9&5@
or
>&6$7@
2. Press the LEARN button. The LED will now
illuminate orange.
>/($51@
3. Now press the button that you wish to store the
learned data on. The LED will now change to red.
4. Next how hold the old remote up to the IR
sensor. (See note). When the learn is complete,
the LED will go out. If two flashes occur, that
means there was an error and the process needs to
be repeated.
Repeat steps 2-4 to learn addition buttons for the
current source.
Note
: Some OEM remote controls have multiple
IR LEDS. It is important to have a direct line
between the IR LED on the OEM remote and the
IR sensor on the IC8001-based remote control.
ERASING LEARNED BUTTONS
Learned functions are associated with the selected
source (TV, VCR etc.) not the device number. To
erase learned functions for a specific device TV,
VCR etc.),
1. Select the device you wish to reprogram with
a device key (TV, VCR, Cable). For instance to
erase the learned buttons associated with the
VCR, press the VCR device button. The light
on the remote will flash once.
2. Press the
[PROG]
button. The light will flash
twice.
3. Select a device code from the code list and
enter the code on the number pad. The light will
flash once for each key pressed.
4. Press the
[PROG]
button again to lock in the
code. The light should flash 3 times. The VCR
function will now operate per the selected
device code without any learned buttons.
Individual buttons cannot be erased.
