background image

4

AIO-GLEIT-20-A4 / Version 180111 / www.innotech.at

DE

3

SAFETY INSTRUCTIONS

3.1

GENERAL

 

-

The system may only be installed or used by people who: 

 

-

 • are trained in the use of PPE (Personal Protective Equipment). 
 • 

are physically and psychologically fit (health restrictions such as heart and   

  circulatory problems, medication, alcohol consumption, etc. reduce user  

 

 safety. 
 • are familiar with the locally applicable safety regulations.

 

-

All applicable accident prevention regulations (e.g. for working on roofs) must be 
observed during installation / use of the fall prevention system.

 

-

A plan must be available which includes rescue measures for all possible emergen-
cies.

 

-

Before works begin, measures must be taken to ensure that no objects can fall down 
from the workspace. The area under the workspace (pavement, etc.) is to be kept 
clear.

 

-

The fall prevention system should be planned, installed and used in such a way that 
proper use of the personal protective equipment makes falling over the edge impo-
ssible. (See planning documents at www.innotech.at) 

 

-

The fall prevention system is subject to maximum load limits. These are found on 
the type plate of the fall prevention system and must not be exceeded.

 

-

The positions of the anchor points are to be visibly documented (e.g. witha a sketch 
of the rooftop) at the access point to the roof safety system. 

 

-

After being subjected to the stress of a fall, the entire safety system is to be taken 

out of operation and inspected by a qualified professional (component parts, faste

-

nings to the substructure, etc.). 

 

-

The safety system must not be altered in any way.

 

-

If access to the safety system is granted to external contractors, their familiarity 

with this user manual is to be confirmed in writing.

 

-

Should the equipment be sold to a customer abroad, the user manual is to be provi-
ded in the appropriate local language.

 

-

Local lightning protection regulations are to be observed.

The following safety instructions and the latest technological standards must be 
taken into account.

Содержание AIO-GLEIT-20-A4













Отзывы: