2
Innosilicon After-sales Team
Email: [email protected]
data cable. Pls contact our after-sales team if the problem still exists.
2.2 Assemble & Operate
Connect the miner and the router by the Ethernet cable and then the miner can start to run
after being powered on.
Notes:
T3-43T miners consume much more power under some modes. Pls choose proper
sockets.
Normal Indicator
：
Being constantly lit represents static IP and flickering represents DHCP
Fault Indicator
：
Being on means there is something wrong with the network; Being off means it is OK.
IP SET button
:
Press it for 1 to 4 seconds and the following functions can be realized:
(1) Sending the IP miner to
the “Set IP” tool;
(2) Changing the miner to a Static IP
within the specific range with the IPset tool
Press it for 4 to 15 seconds, the miner IP will be switched to DHCP and the pool settings will be restored
to default settings.
AC Cable port
Switch
Ethernet port
