3
2.2 CONNECT THE PSU
Connect the miner and the router by the Ethernet cable, then the miner can start to run after power on
the miner.
1. IP SET button:
Press it 1—4 seconds, it will (1) show the IP of the miner in the “Set IP” tool; (2) change the miner to Static
IP mode and modify the IP to the IP range you set in the “Set IP” tool
Press it 4—15 seconds, the miner will become to DHCP and the settings of the miner should be restore to
default.
Press it more than 20 seconds to switch the Dynamic (Static) IP to Static (Dynamic)
2. RESET button:
Your miner will restart if you press it..
3. Fault led: light means the network connection is bad
4. Normal led: Solid means Static IP mode;Blinking means DHCP mode(DHCP)
INNOSILICON CONFIDENTIAL
T2T-32T BTC
INNOSILICON CONFIDENTIAL
