8
5.0 Troubleshooting
Why can’t I get more accurate readings?
The most common problem with accurate part counts is improper
thickness measurement of the tape. Be sure to carefully measure the
full tape thickness including the cover film. Don’t force tape into
gauge slots just find the slot that easily fits the tape but does not
require a tight fit.
Why can’t I get accurate values when using my own ruler?
If using your own ruler to measure reels be sure to measure from the
edge of the 13mm center hole. All diameter measurements are from
the edge of this hole and NOT the center of the reel. Also note that
these measurements while referred to as diameters are simply a
radius type measurement.
Why won’t the meter turn on?
If unit does not power on when battery is installed be sure the polarity
of the battery is correct by referencing the polarity markings molded
into the battery compartment under the battery.
9
6.0 Declarations
RoHS Declaration of Conformity
___
Innoquest, Inc.
910 Hobe Road
Woodstock, IL 60098
USA
Effective Date: 15 November 2011
Model Number: 25050
Description:
SpotCheck Reel Estimator
Type:
Electrical Equipment for Measurement, Control, and Laboratory Use
Directive: 2002/95/EC
“RoHS
Directive”
CE Declaration of Conformity
___
Innoquest, Inc.
910 Hobe Road
Woodstock, IL 60098
USA
Effective Date: 15 November 2011
Model Number: 25050
Description:
SpotCheck Reel Estimator
Type:
Electrical Equipment for Measurement, Control, and Laboratory Use
Directive: 2004/108/EC
Standards: EN
61326-1:2006
EN 61000-4-2:1995, including A1:1998 and A2:2001
EN
61000-4-3:202
EN
55011:2007
William C. Hughes
President
