InnoMedia 6328 Quick Reference Guide
11
Copyright © 2016 InnoMedia. All rights reserved.
Cu: Configuring User Account Database
Cv: Configure VLAN Setting
Cr: Enable/Disable Polarity Reversal
C3: Enable/Disable Call Features
Cx: Configuring EMS
Cp: Configuring end dial digit(#)
Cf: Display the Current IP Information
Ci: Configure the IP Information
Cw: Change Admin name and Password
Ce: Change User name and password
C1: Config Dynamic codec payload type
C2: Config 2833
Cg: Config RTCP-XR
E: Exiting and Logout
G: Voice Volume Control
Ga: Set Voice Volume for Each Channel
H: Help Menu
I: Information About this System
Id: Display DigitMap
Ig: Display Voice Volume Level
Ij: Display Parameters for Jitter Buffer Operation
Is: Display the State of All Ports/Lines
Ix: Display network connection and UA registration status
Ik: Display EMS parameters
If: Display Fax parameters
It: Display FXS Setting Parameters
It: (with D1) Show and Save Trace log setting
M: Miscellaneous
Me:
1. SW_UPGRADE disable
2. Enable/Disabled Provisioning
3. DHCP Check Option 43 disable
4. SNMP mibs
5. Credential on re-registration enable
Mb: Configure OSI Timer
Mf: Configure Hook Flash Timer
Mn: Selectable Configuration of IP Elements
Mp: Configure Phone lines
Mh: Show Syslog
Mi: Configure SNTP server
Mq: Configure Syslog server
Mm: Configure Remote Services
Mw: Configure Networking Mode
Mt: Config Hot phone feature
Ms: Config STUN feature
Md: Set Time and Date