InnoMedia ESBC 8528-4B Скачать руководство пользователя страница 8

8

Appendix A. LED Status Summary

LED / Control

Blinking State

ESBC 8528-4B State

PWR

Steady Green

Device power is on

Off

Device power is off

UPS

Solid Orange

Battery Fully Charged

Blinking Orange 

Battery is charging (AC power on)

Solid Green 

Battery is in use (AC power off)

Blinking Red 

Battery Low (AC power off)

Solid Red

Failed or Bad battery (AC power off)

Off 

Battery discharged (AC power off)

BATT-INT

Solid Orange 

Battery Fully Charged

Blinking Orange 

Battery is charging (AC power on)

Solid Green

Battery is in use (AC power off)

Blinking Red

Battery Low (AC power off)

Solid Red 

Failed or Bad battery (AC power off)

Off 

Battery discharged (AC power off)

BATT-INT
RECV

Steady Green

The cable modem module is locked to downstream frequency

Blinking Green

The cable modem module is searching for downstream 

frequency

Blinking Green simultaneous 

with SEND LED

The cable modem module is currently upgrading

Off

The cable modem module is not locked to downstream 

frequency

SEND

Steady Green

The cable modem module is locked to upstream frequency

Blinking Green

The cable modem module is searching for the upstream 

frequency

Blinking Green simultaneous 

with RECV LED

The cable modem module is currently upgrading

Off

The cable modem module is not locked to upstream frequency

ONLINE

Steady Green

The cable modem module has passed packet cable 

provisioning (including config file download) and is registered 

with the CMTS

Blinking Green

The cable modem module is attempting to register with CMTS

Off

The cable modem module has not passed provisioning and 

has not registered with the CMTS

LAN 1-4

Blinking Amber

When Data is passed while PC is connected to LAN Ethernet 

port

Off

No PC connected to USB or LAN Ethernet ports

PHONE 1-4

Blinking Amber

The connected telephone handset is on the hook (not in use) 

and there are new voice mail messages

Steady Amber

The connected telephone handset is off the hook

Off

The connected telephone handset is on the hook (not in use) 

and there are no new voice mail messages

Содержание ESBC 8528-4B












Отзывы: