73
InnoMedia, Inc
.
All Right Reserved
1. SW_UPGRADE disable
2. Disabled Provisioning
3. DHCP Check Option 43 disable
4. SNMP mibs
5. Credential on re-registration enable
Do you want to change [1-5]
Me configuration description
1. SW_UPGRADE
= currently not supported
2. Provisioning
= select this option to enable provisioning and
choose the protocol variant (see Provisioning
Mode Description below).
Provisioning Mode Description:
For HTTP Provisioning
•
Mode 2 - non-secure
•
Mode 816 - secure and encryption
type AES. Need InnoMedia utility
programs to encrypt configuration file.
•
Mode 9768 - secure and encryption
type RC4. Need InnoMedia utility
programs to encrypt configuration file.
•
Mode 909 - secure and encryption
type RC4. Need InnoMedia utility
programs to encrypt configuration file.
For TFTP Provisioning
•
Mode 762 - secure or non-secure
- Encryption RC4. Need InnoMedia
utility programs to encrypt
configuration file.
- Encryption AES_CBC_256. Use
"openssl" to encrypt configuration file.
3. DHCP Options 43 enable/disable
= enable or disable Option 43
4. SNMP MIBs
= select specific MIBs to be used by different
vendor requirements/standard
5. Credential on re-registration
select this option to enable or disable sending
credential on re-registration
Configuring Flash Hook timer (Mf)
Use the "
Mf
" command to change the default timer for the sending a flashhook to the SIP
Device. The default setting is 800ms, and you may specify it to be as short as 10ms and as
