Design Service,Production Service
www.inno-maker.com
Support:
[email protected] www.inno-maker.com/wiki
Bulk Price:
6
IR is connected to PIN37(GPIO_26) , But we have no software for it right now. We will release
new software version after finish it. If you have any advices please feel free to E-mail to us.
2) ID EEPROM: (U5, No soldering on-board )
Pin 27 and 28 are always reserved for an ID EEPROM on the Raspberry Pi. Independently
which card you use. It’s useless for most application. If you want to use this function, you
need to solder the IC, resistance and capacitance by yourself.
3) USER EEPROM: (U8 No soldering on-board )
It connected to the same IIC port with DAC. you need to solder the IC and Confirm IIC slave
devices. If you a novice of Raspberry Pi, We really wouldn't advise do that.
