INNOLIVING PROFESSIONAL XL INN-560, Руководство пользователя

Страница: 21 / 28

21
GB
Take the bottom of the machine, align the screws with the hole position, find the largest
round hole position on the base (as shown by the arrow), and pass the power cord through it.
Once the cable has been correctly positioned under the base, which therefore must not be
bent or damaged, proceed to fix the base with the screws using the fixing for the cable.
PRODUCT USAGE
• Connect the power cable with the socket: the power supply is switched on normally and
the purifier will enter standby mode.
• Press the switch button once to turn on the device and the default functions: power supply
indicator, timer, fan speed at 3rd speed level, filter cumulative countdown; press the switch
button again to turn off the device.
• In the startup state, press the fan speed button to control the speed of the fans from 1 to
4 level.
• Short press child lock button: the machine enters in the lock mode; all key functions can’t
be managed (except child lock): press 3 seconds again to unlock the machine.
• Countdown of filter change reminder is 1,500hrs, machine will start to alert from 1,440hrs.
After replacing the filter, press and hold the Filter button for 3 seconds to restart the filter
count counter.
• Smart mode button: press this button to enter smart mode in boot state.
FUNCTIONS
This purifier works through a 4 steps purification system, able to effectively purify the air
and make like healthier.
Power
Turn ON/OFF the machine
Touch once to turn off and enter standby
State and touch once again to turn on.
Fan speed
The default fan speed at boot-up is Level 3. The fan speed can be adjusted
between 1-4 level.
Child lock
Touch the button to lock all button functions at one time, and press 3 seconds to
unlock them.
Filter reset
The initial value on the screen is 1500 hours. When the data of screen “FILTER
REMAINING TIME” is less than 60 hours, it will flash to remind that the filter must
be replaced. After replacing, press the “FILTER RESET” button for 3 seconds to
reset.
Timer
The default mode is continuous working status, touch the button to set the timer
which can be between 0-12 hours.