13
GB
Water Tank Indications
Frequently check the water level in the tank. Make sure the water level is not below the
minimum level ‘MIN’ indicated on the tank itself. The activation of the cooling function with
a low level of water can cause damages to the pump and void the warranty.
Before pouring the water in the tank, turn the device off and disconnect it from the mains.
HOW TO USE THE DEVICE WITH THE ICE TABLETS
In order to increase the effect of air cooling, it is possible to use the ice tablets provided with
the device. Put the ice tablets in the freezer for a few hours. Once frozen, place the tablets in
the tank by adding water up to the “MAX” level indicated. The use of ice tablets allows an
increasing effect of air cooling of the device.
Cleaning and Maintenance
Dust accumulating on the dust filter may prevent proper air flow. Therefore we recommend
to clean the filter and all its parts regularly, following the instructions below.
Before proceeding with any maintenance or cleaning operation, switch off the
appliance and remove the plug form the main socket.
Never clean the product components with flammable liquids. The vapours may cause fire or
explosion
Dust Filter
To remove the dust filter, simply press the two release levels located at the top of the filter
down to remove it. Use a mild detergent and a soft brush to clean and remove dust and dirt
from the filter. Put the filter on again inserting the bottom firstly and pushing the upper part
to lock it.
Cooling Pad
After removing the dust filter, the cooling pad is visible. Take out the pad with the appropriate
protection and gently remove the pad. Use a clean, soft brush to remove dust and dirt from
the pad. Rinse with water if necessary, and leave to air dry. Do not use chemical cleaning
solutions that can damage the pad
How to fill the tank:
Turn the tank lock lever in the horizontal position and remove the
tank. The tank lock lever is in the back of the device. Insert the ice tablets inside the tank and
add tap water (Fig.-2 and -3) making sure not to exceed the “MAX” level indicated in the
back of the tank. (Fig.-4)
Place the tank, and turn the lock lever in the vertical position
