5
GB
LIGHTED MIRROR
USER MANUAL
Thanks for purchasing INNOLIVING lighted mirror INN-098.
Before starting using the appliance, please read carefully all the instructions below. It is
advisable to save this instruction manual for a future use.
IMPORTANT SAFETY INSTRUCTIONS
- Use this product only for its intended purpose, as described in this instruction
manual. Any other use is improper and therefore hazardous.
- Before starting using the appliance, please check the product is not damaged. In case
of doubts, please address to a specialised centre.
- Do not mix old and new batteries. Always insert batteries of the same type, do
not use together alkaline, standard (Zinc-Chloride) or rechargeable (nickel-cadmium)
batteries.
- Always switch off the unit after use. It is recommended to remove the batteries from
the device if not used for a long time.
- WARNING: In order to protect children from risks never leave the appliance
unattended. Always store it out of their reach. It is advisable adults’ supervision in
case the product is used by invalids or children. THIS PRODUCT IS NOT A TOY.
- Never sit or lean heavily on the unit.
- Keep the unit away from heat, direct sunlight, moisture, sharp objects and similar
ones.
- Do not place the appliance under blankets or pillows, as excessive heating may occur
thus causing fire, electric shocks or other injuries to the user.
- Let the bulbs cool down before store the unit.
- Always switch the device off before changing the batteries.
- When in use, do not place the mirror on a soft surface, such as bed, a pillow or
similar, to prevent it from overheating.
- This device is designed for domestic use only.
FEATURES
ON/OFF light button
5X magnifier mirror
Power: 4 x “C”1,5V (LR14) size batteries not included
DC 6V Adapter not included
TO INSTALL OR REMOVE THE BATTERIES
Remove the cover of the battery compartment located under the base of the device.
Insert 4 batteries, making sure to match the polarities as indicated on the device. Close
the cover under the device.
USAGE
Place the mirror on a flat, stable surface.
Adjust the inclination of the mirror using the folding arm.
To activate the lighting of the mirror, slide the switch on the base to the “ON” position.
To switch it off, move it back to the “OFF” position.
Note: This device may also be used as a regular mirror without lighting, when there are
no batteries or when the switch is on “OFF” position.
