INNOLIVING Ercole INN-554, Руководство пользователя

Страница: 18 / 24

18
GB
1. Turn upside down the machine, and rotate the base along the direction marked “OPEN”.
2. Take out the filter from the machine.
3. Remove the bag form the filter.
4. Install the filter into the machine.
5. Then Install the base, rotate and tighten the base along the direction marked “CLOSE’”.
INSTRUCTIONS
When connect to the power socket, the buzzer will ring for 1 second.
BUTTON OPERATION
On/Off button
• Touch the power button to turn on the machine, the buzzer will ring one time, the power
indicator and the low grade of wind speed indicator light turns green.
• Touch the button again, the buzzer will ring one time and the machine will turn off with
all lights turn off.
Notice: if the machine is not unplugged, it will record the set working modes at the moment
before being turned off.
Timer
• When the purifier is on, press the timer button to set among the mode of 2H, 4H timer:
the buzzer will light on and the corresponding indicator will be on.
• Press again, the timer indicator turns off and the machine will work continuously without
timer.
• When the purifier is on, it will begin to count down. When the time is up, the fan will stop
working and all lights will be off.
Notice: The timer can’t be set while the purifier is off.
Fan speed button
• When the purifier is on, press the fan speed button, the buzzer will ring one time.
• Press again to adjust the fan speed among the circulation of Low grade, Middle grade and
High grade: when set, the buzzer rings and the corresponding indicator will be on.
Notice: The fan speed can’t be set while the purifier is off.
Light control button
• When the purifier is on, touch the light control button, the light degree can be set
between soft light and standard light mode: when set, buzzer rings.
• If pushed again, the LED light turns off.
Notice: The light control button can’t be set while the purifier is off.
REMINDER OF REPLACING FILTER
When the machine detects the filter is saturated, the power indicator will keep flashing in
red.