Innokin iTaste MVP20W, Руководство пользователя

Страница: 6 / 11

9 8
The integrated Puff counter will record the number of puffs you have taken. Either
press “ P ” button or “ U ” button for 1 second to check the number of puffs. The
Puff Counter will reset to 0 whenever the device is powered off.
Puff Counter:
Press the power button “ ” three times in rapid succession to turn on the
MVP20W. When the MVP20W is powered on Hold down the “ ” button to
activate the atomizer and vape. When the MVP20W is not in use, press the “ ”
button three times in succession to power off the MVP20W Advanced Personal
Vaporizer. Always power off the MVP20W Advanced Personal Vaporizer when it is
not being used, or when it is going to be stored in a pocket, bag or purse.
ON/OFF battery switch:
If the activation button is held for longer than 10 seconds the MVP20W Advanced
Personal Vaporizer will stop firing until the button is released and pressed again.
The Red LED and Battery bar will continue blinking when the battery capacity is
lower than 3.3V and the MVP20W Advanced Personal Vaporizer will power off
automatically.
The MVP20W Advanced Personal Vaporizer monitors the battery voltage and will
automatically power off when the battery is discharged.
Ohms meter:
Reads the resistance of your atomizer/cartomizer/clearomizer.
10 seconds Cutoff:
Low Voltage Warning
Over-Discharge Protection:
Short Circuit/Atomizer Protection protects the MVP20W Advanced Personal
Vaporizer against shorted atomizers and will stop the unit from functioning in
unsafe conditions.
Short Circuit/Atomizer Protection:
SAFETY: