OPERATION
To turn the device on you must press the power button
3
times.
There are three LED’s embedded within the power switch – when the device is turned on
they will light up in this sequence:
From this point on whenever you press the power button the device will power the
attached atomiser and the following LED will light whilst the button is pressed:
As the battery voltage gradually lowers through usage eventually the following LED will light
when you press the power button:
Finally as the battery voltage is almost spent the following LED will light when you press the
power button:
Shortly after this the same LED will eventually flash and the unit will shut down indicating
that it will need to be recharged before it can be operated again
http://www.sfumando.it/itaste-mvp/
http://www.sfumando.it/itaste-mvp/
