3
IR lens
(Lens extension for
high installations)
Button
Signal LED
should face towards user
TECHNICAL SPECIFICATIONS
Battery lid
The Stove Alarm is a battery-
operated device. Use only new
CR2302 button cell (watch type)
batteries. To avoid damage or mal-
function, do not use other types.
Pull out the battery lid. Place the
battery under the lid, and slide
the lid back in. Make sure that
“the plus side” comes upwards
(towards the battery lid). The
Stove Alarm makes a “beep”
when the battery is inserted
correctly. Replace the leaking
battery immediately.
SGS1030 Stove Alarm
• Nature of supply: Battery operated
(CR2302
Button Cell,
3V DC)
• Sensor Dislocation Alarm
• Adjustable sensitivity levels (learning)
• Audible alarm signal min. 65 dB(A),
max. 80 dB(A) @ 40’’ (100cm)
• Sensing distance (from the range top)
18’’–32’’ (45–80cm) OTR/range hood installation
• Flame retardant and high heat resistant plastics,
UL recognition 94 V-0
• Wireless 315 MHz/10mW RF
• Operating ambient temperature:
32 °F to 95 °F ( 0 °C to 35 °C)
• Intended transportation condition of control:
14 °F to 131 °F (-10 °C to 55 °C)
Applied standards
FCC Rule Part: 15.231:2017 (Periodic operation in the band
40.66-40.70 MHz and above 70 MHz)
IC Rule Part: RSS-210 Issue 9, 2017 and RSS-GEN Issue 5, 2018
U.S. Pat. Nos 10,051,993 and 10,347,112
Installation plate
with adhesive tape
Stove Alarm
