Innodisk 3SE Series, Руководство пользователя

Страница: 7 / 21

1.8” SATA SSD 3SE
7 Rev. 1.1 TPS, Jan. 2015
1. Product Overview
1.1 Introduction of Innodisk 1.8” SATA SSD 3SE
Innodisk 1.8” SATA SSD 3SE products provide high capacity flash memory Solid State Drive (SSD)
that electrically complies with the Serial ATA (SATA) standard. Innodisk 1.8” SATA SSD 3SE is a
SATA III 6.0Gb/s flash based disk, which delivers excellent performance and reliability. Especially,
Innodisk 1.8” SATA SSD 3SE is designed for industrial applications, and supports several SATA
features, including NCQ and S.M.A.R.T. Innodisk 1.8” SATA SSD are designed to have good
performance with no latency. It will effectively reduce the boot up time of the operation system.
The power consumption is also much lower than a traditional hard disk drive (HDD).
1.2 Product View and Models
Innodisk 1.8” SATA SSD 3SE is available in follow capacities:
1.8” SATA SSD 3SE 8GB 1.8” SATA SSD 3SE 64GB
1.8” SATA SSD 3SE 16GB 1.8” SATA SSD 3SE 128GB
1.8” SATA SSD 3SE 32GB 1.8” SATA SSD 3SE 256GB
Figure 1: Innodisk 1.8” SATA SSD 3SE
1.3 SATA Interface
Innodisk 1.8” SATA SSD 3SE supports SATA III interface, and is backward compatible with SATA
I and SATA II. The SATA III interface can also work with Serial Attached SCSI (SAS) host system,
which are located on server motherboards. Innodisk 1.8” SATA SSD 3SE is compliant with Serial
ATA Gen 1, Gen 2 and Gen 3 specification (Gen 3 supports 1.5Gbps /3.0Gbps/6.0Gbps data rate).
The SATA connector uses a 7-pin signal segment and a 9-pin power segment.