44
INNOCIGS EXCEED AIR PLUS – USING THE DEVICE
There is a airflow control ring located on the head base of the device. It can be adjusted by slightly
turning and is adaptable to your vapor preferences. The more air flows through the device
(the more the air slot or the air holes are open), the lower is the drawing resistance. Pay particular
attention to a sufficient air supply during sub-ohm vaping.
Adjusting the Air Supply
The mouthpiece is placed on the top cap of the clearomizer. It can be removed by gently pulling up and
once again attached by applying gentle pressure on clearomizer. The mouthpiece may be cleaned with warm
water. Make sure that it is completely dry before reinserting into the clearomizer.
Changing the Mouthpiece