60
Install custom Logo
Press the fire button and the „Up“ button at the same time to enter the screen protection mode.
Press the „Up“ button again to enter the logo mode. You can select between „On“ (Logo ist display-
ed) and „Off“ (Logo is not displayed) by pressing the „Up“ button. Press the fire button to confirm
your selection. Connect the device to your computer using the USB cable to upload your personal
logo. Use a monochrome image in bmp format with a maximum of 64 x 40 pixels for your logo.
Adjust the Preheat Function
When the device is powered on, press the fire button and the right adjustment button
simultaneously for two seconds to enter the menu. (LOGO mode appears first) Press the left
adjustment button to enter the PREHEAT sub menu. Press the fire button to switch between
preheat wattage and preheat time. Press the right or the left adjustment button to increase or
decrease the parameter. Confirm your setting by pressing the fire button.
INNOCIGS EVIC PRIMO MINI – USING THE DEVICE