![InnoCigs EGRIP 2 Set Скачать руководство пользователя страница 50](http://html1.mh-extra.com/html/innocigs/egrip-2-set/egrip-2-set_user-manual_2062415050.webp)
50
INNOCIGS EGRIP 2 – OPERATING AND CHANGING THE DISPLAY MODE
2. Installing new atomizer coils
If an atomizer coil is replaced with one which has a greater resistance than the previous one, it is
important to reset the “Base Resistance“ of the atomizer. This is the resistance of the coil at room
temperature. Initiate a reset by pressing the fire button of the eGrip 2 while the clearomizer
and base are not attached. After connecting the clearomizers base with a new head,
“New Coil Up, Coil Same Down“ will appear on the display. Confirm that a new coil has been
installed by pressing the “up“ button.
If you see this message in other instances - especially when you reinstall the same coil which is still
warm from recent use - press the down button, so that the “base resistance“ is not reset.
Always remember to adjust the operating mode of the coil used to ensure proper temperature
control.
b) Before changing to another atomizer coil, unlock the resistance. Otherwise, the VT system will
not work properly. In “Resistance Unlock“ mode, please make sure that the coil is changed at room
temperature to ensure temperature accuracy.
Содержание EGRIP 2 Set
Страница 1: ...Bedienungsanleitung User Guide EGRIP 2 SET...