Innoband 6000-B1 Скачать руководство пользователя страница 58

Страница: 58 / 87

6000-B1

User’s Guide

Fault Management

This page will show the IEEE 802.1ag standard for C.O. side. to remotely manage
VDSL CPE which is in ATM bridged mode. This feature is required only when service
is provided.

Figure 68: Diagnostic Fault Management

Global Setting:



This Fault MGMT feature is for VDSL PTM mode only.



Select a level (0-7)



Enter the target device

‟s MAC address to perform a CFM loopback test.



Click the

Set MD Level

to set Maintenance Domain.



Loopback Message (LBM):

This shows how many Loop Back Messages (LBMs)

are sent and if there is any inorder or outorder Loop Back Response (LBR)
received from a remote MEP.



Linktrace Message (LTM):

This shows the destination MAC address in the Link

Trace Response (LTR).



Click

Send Loopback

to have the selected MEP send the LBM (Loop Back

Message) to a specified remote end point.



Click

Send Linktrace

to have the selected MEP send the LTM (Link Trace

Messages) to a specified remote end point.

Содержание 6000-B1
























































































Результаты поиска

Содержание 6000-B1

Отзывы:

Innoband 6000-B1, Руководство пользователя, Страница: 58 / 87

Результаты поиска

Содержание 6000-B1

Отзывы: