16 | INSTRUCTION MANUAL INNO
PICCO
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: reorient or relocate the receiving antenna, increase the separation between the equipment and the recei-
ver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, consult the dealer
or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause un-
desired operation.
INNO International GmbH
Heinrich-Hertz-Straße 12
59423 Unna / Germany
Phone +49 (0) 2303 333 · 333
www.inno-international.com
7 WARRANTY
WARRANTY
The device comes with a two-year warranty as from the date of purchase. Exception: The INNO
PICCO
has already been repaired or
replaced under warranty. In this case, the warranty applies until the end of the original warranty period or six months as from the
date of repair or replacement.
REPORTING / VALIDATING A FAULT
If you find your INNO
PICCO
to be faulty, please report it to your dealer and provide the original sales receipt and serial number as
well as a description of the fault. The manufacturer or its authorised customer service provider checks all functions and deter-
mines if the fault is due to material or manufacturing defects covered by warranty and therefore qualifies for your
INNO
Picco
to be repaired or replaced.
EXCLUSION OF WARRANTY
The following defects are not covered by warranty. Defects caused by:
Misuse and non-compliance with the operating instructions and incorrect operation;
Changing the INNO
PICCO
so that it no longer corresponds to the features described in the operating instructions;
Attempting repairs or repairs carried out by an unauthorised person;
Using the INNO
PICCO
in connection with third-party products;
Deleting, removing, changing or rendering unreadable the manufacturing number of the device;
Connecting the device to an unsuitable power supply or force majeure.
LIMITED WARRANTY
INNO International GmbH shall be held liable to the full extent of the above-stated warranty. INNO International GmbH therefore
shall not be held liable for any additional warranty claims for loss or damages (except those caused by acts of gross negligence)
resulting from the acquisition, possession, sale or use of the INNO
PICCO
. INNO International GmbH shall not be held liable under
any circumstance for subsequent damages, delays, insufficient information or advice and breach of copyrights. This does not af-
fect any customer rights relating to material faults.
VARIOUS PROVISIONS
No person, including all sales partners, dealers, agents and representatives, shall be entitled to assume any warranty or amend
the warranty provisions in the name of INNO International GmbH. Buyers must determine for themselves if the INNO
PICCO
is
suitable for their intended purposes.
Our hotline will be pleased to answer any of your questions on +49 (0) 180 501 501 3
(14 cent / min. from German landlines, max. 42 cent / min. from mobile networks.
Additional costs may be incurred when phoning from foreign networks, depending on
the fees of the network provider.).