INNO-FLEX-Distribution-Box
© INNO-Products GmbH - Print-No. 1031.2.GB 01.2009 as of INNO-Flex-distribution is subject to change. Illustrations and specifications are subject 1
1. Delivery:
-
Art.No. 2.022: FV6-Central
1 INNO-Flex base with 6 Flex-duct connections 75
1 INNO-Flex connection DN 180 with reduction to DN 150
-
Art.No. 2.023: FV12-Flat
2 INNO-Flex base with 6 Flex-duct connections 75
1 INNO-Flex connection DN 180 with reduction to DN 150
-
Art.No. 2.024: FV12-Central
2 INNO-Flex base with 6 Flex-duct connections 75
2 INNO-Flex connection DN 180 with reduction to DN 150
-
Art.No. 2.025: FV18-Flat
3 Inno-Flex base with 6 Flex-duct connections 75
1 INNO-Flex connection DN 180 with reduction to DN 150
-
Art.No. 2.026: FV18-Central
3 Inno-Flex base with 6 Flex-duct connections 75
3 Inno-Flex connection DN 180 with reduction to DN 150
- A recent installation, operation and maintenance manual
2.1 Field of application and use:
The INNO-Flex-distribution system was developed specifical-
ly for the connection of pipes and ISODuct INNO-Flex hose
and used for the controlled ventilation of buildings, flats, etc.
2.2 Improper operation:
- Use fat-containing waste air, explosive gases, dust-laden
air or adhesive aerosols
- Outdoor installation
- Connection of cooker hoods to the ventilation system
2.3 Safety hints:
- Always follow the safety rules on this line. Failure to comply
can result in personal injury or damage to the device.
- Keep these instructions should be in the vicinity of the
device.
- Put the distribution system only in accordance with the
above-described purpose.
- Let yourself introduce into the system after the installation
from your installer.
- Installation and repair work must be carried out only by
authorized specialist personnel.
- Place the plant out of service immediately if you notice any
damage or defects are a risk to persons or property.
Further use should be avoided until full restoration!
- Make sure the distributor only grown with all the connecting
pipes.
- The distributor must only be operated under the framework
of the systems planning of the calculations.
2.4 Warranty and Product Liability:
For each delivery are subject to our "Terms and Conditions"
in its current version. The distributor has a 2-year manufactu-
rer's warranty from commissioning, starting no later than two
months from delivery date (delivery INNO-Products GmbH to
the installer). The warranty is limited to the pure material
replacement and does not include the service.
The guarantee applies only on proof of an executed operati-
on and regular maintenance performed in accordance with
our rules, by one of our authorized installer.
Warranty claims can be material or construc-tion made errors
of law only.
If you have any complaints, the unit may not be removed wit-
hout our written consent.
A warranty on parts will be granted only if these were sup-
plied by us and installed by an authorized installer.
The warranty is void:
(a) if the device is operated during the construction phase
and is very dirty.
(b) if no original spare parts.
(c) if unauthorized changes are made to the plant.
(d) if the device is exposed to aggressive substances.
(e) if the device is operated with aggressive air.
(f) automatically after a period of 2 years.
Further on, the company INNO-Products not liable for dama-
ges that are attributable to:
(g) failure to follow safety, operating and maintenance
requirements of this technical documentation.
(h) the use of non-INNO Products geliefer-ten materials.
The responsibility lies solely with the installing operation..
(i) normal wear and tear.
3.1 Cutting and broken edges on the body:
X
Cutting edge revision cover
Y
Cutting edge slot base
Z
Cutting edge INNO-Flex duct connection
[
Cutting edge content, body
\
Drive-in cover for pipe connection
3.2 Cutting edge on the pipe socket:
]
Cutting edge as connectors for central distribution box
^
Cutting edge for ISODuct pipe DN 180
Instruction Manual
X
^
]
\
[
Z
Z
Y
