Knob bolts
Lever
Rail
1
2
Lever
5735-70195
These additional instructions are for the slide feature. After reading this manual, keep it in a safe place along with the instructions for the rest of your
carrier system.If you have any questions regarding the information in this manual, please contact the service center listed at the end.
BRA550
BRA5 0
Slide Block Additional Instructions
Slide Block Additional Instructions
The slide block includes the parts listed below. Verify that they are included with the
carrier you have purchased. In the event that any of these is missing, contact our
service center as listed at the end of this manual.
1
2
3
4
5
Parts
Slide block
Qty
NO.
Ski cradle A
Ski cradle B
Ski cradle C
Knob bolt
Rubber seal
2
6
2
2
4
2
1
2
3
4
5
6
4
5
6
1
2
3
A
B
C
1) Lift lever to release lock for sliding.
1) Remove the two knob bolts
REMOVING THE SKI CRADLES
CARRYING SKIS
CARRYING SNOWBOARDS
The ski cradles must be inserted in this order.
From lever side: A - A - A - B - C
The arrow points toward the lever.
Follow step
3
, the insert the rubber seal into
the track on the slide block.
Place skis back to back in pairs in each cradle.
Load snowboards on base in pairs top-to-top, as in the illustration.
Load skis with the tail end toward the front of the box.
1) Lift the cradle latch.
2) Pull the slide block and slide it out from the plate
2) Pull the latch down.
2) Pull back on the lever to slide out the base.
When using the slide system, park the car
on horizontal ground.
CAUTION
3) Slide out ski cradles.
Lever
Push whole lever
Lever
Lever
Click
Slide block
Plate
1
2
3
Ski cradle
Stopper
A
A
A
Ski cradle
B
C
Lever
Lever
Ski
Tail
Front
Rear
Rubber Seal
Snowboard
Binding
3) After loading your gear, push the base back to its original position until clicks into place.
REMOVING THE SLIDE BLOCK
