INNO Instrument VIEW600, Руководство пользователя

Страница: 57 / 81

Chapter 8 Fiber Microscope 55
7
VFL and Light Source
Overview
The types of source of VIEW600 include visual light source and light source.
Visual light source (VFL)
Visual light source equipped in View600 can offer visualization method for fiber
fault location. The red light from visual light source can be captured by human
eyes, being able to identify direct fault location in fiber test dead zone or make fiber
core calibration in multi-fiber cable. The visual light source in View600 can launch
two types of light source: continuous light source (CW light) and 2Hz blink light.
Stable Light source (LS):
In this device, the module is interchangeable as need. The corresponding module
should be loaded at first before VFL and light source function are enabled. If not, a
pop-up message will appear on the screen, as shown in the following picture:
Chapter 7 VFL and Light Source
After you have loaded the module, you can click “Light Source” to enable the light
source function.