Inngenso IT101 Скачать руководство пользователя страница 6

In both cases the heating turns off. The communication 
might be lost due to old batteries in the thermostat or 
because the thermostat is too far away from the receiver. 
Keep in mind the connection status (light signal) of the 
receiver and the thermostat.

Freezing damage due to too low room temperature

If the room temperature is set too low in some rooms, the 
heating system can be damaged due to freezing.
• Ensure that during the frost period the heating  
system remains in operation and that all rooms during 
your absence are sufficiently heated.
• The thermostat has an integrated frost protection, 
which is activated at 7 °C. Frost protection activates the 
heating and protects the system from freezing.

Proper use of the device

Improper use can result in health and life hazards to the 
plant operator or third parties.
This product is not intended for use by persons (including 
children) with limited physical, sensory or intellectual 
abilities or persons without experience and/or knowledge, 
unless they are under the supervision of a person in charge 
of their safety or have been instructed by that person to use 
the product. Children must be supervised to ensure that 
they do not play with the product.
This thermostat can be used to control a heating system 
with a boiler.

Содержание IT101





























Отзывы: