Innes Corporation Pty Ltd
3/38 Leighton Pl
Hornsby, NSW 2077, Australia
Phone: +61 2 9987 0499
Fax: +61 2 9987 0599
E-mail:
Website: http://www.innescorp.com.au
7
Auricon 2.2 & 4.1 Manual
Installation (Windows NT version 4)
Auricon driver version 6.00.00.3505 (or later) does not support this platform. Use version
4.00.3504 instead (available on request from Innes Corporation).
Windows NT version 4 does not support Plug and Play so it is necessary to manually install the
driver after you have inserted the card.
Switch off the computer and carefully install the Auricon card in any free PCI slot, observing the
normal precautions against static electricity. Then switch the computer back on and boot
Windows NT.
The Auricon driver is installed through the Windows NT Control Panel. Insert the Auricon driver
CD and follow these steps to complete the installation process.
•
Click
on
Start
-
Settings
-
Control Panel
and then double-click on the Multimedia icon.
•
Click
on
the
Devices
tab then click on
Add…
•
Select
Unlisted or Updated Driver
then click on
OK
.
•
In the Install Driver dialog box, type in the CD-ROM path (eg.
D:\NT4\)
.
•
The Auricon driver should be found. Click on
OK
to complete the installation.
Note that it is not necessary to reboot your PC after installation as the drivers are automatically
activated.
To activate the loudspeaker symbol on the taskbar, reopen
Control Panel
, double-click on the
Multimedia icon and then tick the appropriate checkbox. The default playback and recording
channels can also be selected.
Nominal line level and stereo/mono configuration may be changed by clicking on
Audio for
Auricon
under
Audio Devices
on the
Devices
page of the multimedia control panel, clicking
on
Properties
and then on
Settings
.
Limitations under Windows NT 4
The Auricon does not support the full suite of multimedia functions (such as MIDI playback,
digital CD playback or multiple stream mixing and splitting) under Windows NT 4. The wave
input and output functions are fully supported except for input low-priority mode.
The mixer functions provided are master input and output levels, mutes and peak meters, line
input level controls and mutes, digital loopback level controls and mutes, and wave and monitor
output level and mute controls. Refer to the topology diagram at the end of this manual.
