INNACOMM W3400V, Руководство пользователя

Страница: 125 / 136

122
192.168.1.* (2~254). The functions are enabled by default and at the same time
the PC is configured to obtain IP and DNS addresses dynamically.
Setting Procedure
Step 1 Activate your browser and enter 192.168.1.1 in the address bar to login in
to the Modem.
Step 2 Click Advanced Setup > WAN , then click Add .
Step 3 In the ATM PVC Configuration interface, configure VPI/VCI as 8/35 and
then click Next .
Step 4 In the Connection Type interface, select PPP over ATM ( PPPoA ) and
VC MUX as the encapsulation, and then click Next .
Step 5 In the PPP User name and Password interface, enter the user name
and password provided by your ISP. And then click Next .
Step 6 In the Enable IGMP Multicast and WAN Service interface, keep the
default configuration unchanged and then click Next .
Step 7 Check the network configurations and ensure that all settings comply
with the information provided by your ISP, and then click Save .
Step 8 Click Save/Reboot to apply the changes and reboot the system.
You can also modify the PVC 8/35. If you need to modify the LAN IP address and
DHCP server information, you can operate in LAN in Advanced Setup .
After the dial-up is complete, the IP address that the Modem obtains at the
WAN-side port ppp_8_35_1. Query Device Info > Route, and the route interface is
as follows.
After the built-in PPPoA dial-up is successful, the created WAN-side port is
ppp_8_35_1.