InMotion E-SCOOTER L8D, Руководство пользователя

Страница: 14 / 21

4 How to ride the scooter?
4.1 Riding the scooter
Users are suggested to learn from this manual before the first riding, to avoid any unpredictable injuries. These instructions were made for the new scooter
riders, stating in detail how to ride the scooter correctly, and matters need more attention on riding are listed as well. Users shall read them carefully and ride
the scooter by the instructions.
4.2 Precautions before riding
The abrasion will happen on riding and parking, this may affect the performance of the scooter. Here is the checking list before riding the scooter:
* All parts shall be checked to make sure they are fixed securely and intact without damage.
* The folding mechanism is locked
* Battery is not in low-power state.
* Make sure the handle is fixed, loosened bolts/ screws are tightened.
* Sufficiently Check the surrounding driving environment, make sure it’s free from the disturbance of cars, walker, pet, bikes and other obstacles.
* Do NOT ride on a slippery and wet field.
* Safety helmet and protecting articles against the possible are suggested.
3.2 How to charge the Scooter?
Step 1:The charging port located on one side of the scooter footboard. Open the charging cover, and make sure the charging port is dry.
Step 2: Insert the power cable into the charging ports.
Step 3: When the indicator of a charger is on (red color), it means charging. When the indicator turns green, it means the battery is fully charged. Stop
charging at this time, because over-charging would affect the lifetime of batteries.
3.3 Tips for charging Safety
Please recharge the batteries every THREE months or each time after riding, to extend the lifetime of batteries to the maximum. Make sure to charge it
under a suitable temperature environment.
The battery damages may be caused by failure to recharge on time. As time goes by, the capacity of the battery will be gradually used up, and finally, lead
to over-discharging.
Please use the battery, charger and power cable supplied by the original manufacturer, to avoid over-discharging risk.
Please make sure the connection is correct with the designated cable on charging.
3.4 Protection against Over-discharging
The smart over-discharging protection system was built-into the scooter, which could cut off the power actively when the scooter is in locking state or
shutdown state and low power. The scooter needs to be awakened via charging once under the over-discharging protection state. If the scooter remains
un-awakened state after half an hour’s charging, please contact the purchase of point or manufacturer for support.
Please make sure to be on charging under the well-ventilated environment.
Please make sure to be on charging under the dry environment. Never let the charger or cable approach to water, which may cause an electric shock. Do
NOT touch it with wet hands. Pull out the power- plug immediately in the occurrence of any failure on charging.
After charging completed, please pull out the plug, do NOT pull out the plug by the cable.
Please do NOT allow the charger or cable to approach the sharp or hot object.
Check the charger and charging cable by regular visual inspection
In case of any obvious damages found on the charger or cable, do NOT use it to avoid further impairment and contact with the manufacturer.
Please do NOT repair the batteries, charger or cable by oneself, contact with purchase points or manufacturer for support in case of any problems.
10