Inmes FF-325 PLUS, Руководство по эксплуатации

Страница: 23 / 62

INMES Industrial Ltda – Sliding table saw FF-325 Plus 21
7.3 General Lubrication (Pic. 7.3)
- Weekly clean and lubricate the moving parts of
machine A with a thin film of oil and grease.
- Protect all belts and pulleys from oil
contamination.
(Pic. 7.3)
7.4 Saw machine lubrication table (Pic. 7.4)
Machine Sliding table saw
Grease and lubricant table
Model FF-320
Where to apply? Main car bus Lifting guide Spindle
Swivel
base
Angle
guide
MOBIL
Suggested
Grease/Oil
_
MOBILUX EP2
MOBILGREASE HP 222
MOBILGREASE MP
ESSO
_
LITHTAN EP2 BEACON 2
SHELL
_
EPRO ALVANIA R2
CASTROL
_
SPHEEROL EP2 LM 2
BARDAHL
_ _
MAX LUB APG2
IPIRANGA
_ _
IPIFLEX 2
PETROBRAS
_ _
GMA-2
TEXACO
_ _
MARFAK MP2
CARBOGRAFITE Silicone oil
_ _
Lubrication period 40 hours worked
(Fig.7.4)
7.5 Spare and discard
Replacement should become necessary, so the machine parts to be replaced should be replaced with
original parts to ensure the same efficiency. Replaced parts must be disposed of in accordance with the laws
of each country. Part replacements require training and technical skills; For this reason, the following
instructions must be followed by qualified personnel to prevent damage to the machine and risks to operator
safety.
In the event of mechanical or functional defects in the machine, including guards or tools, contact your
service representative for service. Any maintenance should be done only when the machine is
disconnected from any power source.