Inmarsat IsatDock2 MARINE, Руководство пользователя, Страница: 24 / 36

24
10) Water Resistant IP54 Rating
The IsatDock2 MARINE has an ingress Protection
rating of 54. When installing the IsatDock it is
important that the following steps are taken to
ensure the protection is maintained.
•
The MARINE cover is closed over the
IsatPhone 2. Ensure the latch is engaged
and clicked in place.
Optional through-wall
Right angled adapters can be fitted to the
antenna connectors to allow routing of cables
through a wall. A “clean” installation free
of any visible cabling can be achieved
by running the interface cables from the
connector bay along path ‘A’ and through the
same holes.
SMA Adapter (GPS) TNC Adapter (GSPS)
• Rear Cover Screwed in Place. The rear cover
of the MARINE dock must be screwed down
with at least the four screws indicated below
to ensure the waterproof seal is achieved
(indicated by a & b). Care should be taken
placing the cables in the respective cable
guides as any damage to the sealing foam will
compromise the water resistant foam seal.
A
B
C
a
b